C
C<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
C
C  INPUT DECK FOR TIGCM POST-MODEL PROCESSOR:
C  (mss executable = /FOSTER/binproc.ymp/tigcm.v1.o)
C
C NCASE = number of separate cases to be processed during this run
C         (full set of inputs needed for each case)
C LABEL = 32-character desciptive label for run (can leave blank)
C         (do NOT use colons (:))
C DYN = 1 -> dynamo case (for histories that have potential at 25 levels)
C HISTVOL(S) = history volumes (3 strings per volume)
C DDHHMM = Model day:hour:minute (md:mh:mm) where md,mh,mm are integers
C          and each time enclosed in quotes, e.g., '01:12:00'
C          (number of values usually multiple of 25)
C IYD = year-day for each day of run (e.g., 76080,76081,...)
C IDEN = flag for species densities:
C   0 -> species in number densities and total in mass density 
C   1 -> species and total in mass mixing ratio (as on history)
C   2 -> convert species and total to number densities (cm3)   
C   3 -> convert species and total to mass density (gm/cm3)
C LOG10PL = 1 -> plot log10 of fields where appropriate (densities)
C COLOR = 1 -> make color fill contours (otherwise, black and white)
C PLGLB = 1 -> Contour cylindrical equidistant global projection
C               at current ut and at selected pressures
C PLPOL = flag for stereographic (polar) projections at current
C          ut and at selected pressures as follows:
C   0 -> do not make polar plots
C   1 -> make polar plots for southern hemisphere only
C   2 -> make polar plots for northern hemisphere only
C   3 -> make polar plots for both hemispheres
C PLSATV = 1 -> Contour on satellite view projection
C               (use LATLON for projection orientation)
C PLLATZP = 1 -> Contour longitude slices (lat on x-axis, zp on y-axis)
C PLLATHT = 1 -> Contour longitude slices (lat on x-axis, ht on y-axis)
C PLLONZP = 1 -> Contour latitude slices (lon on x-axis, zp on y-axis)
C PLUTLAT = 1 -> Contour ut on x-axis, latitude on y-axis
C PLUTZPM = 1 -> Contour global means with ut on x-axis, zp on y-axis
C                 (in this case, slon and spls are ignored)
C PLUTHTM = 1 -> Contour global means with ut on x-axis, height on y-axis
C                 (in this case, slon and spls are ignored)
C PLCOOL = 1 -> Include heating/cooling terms when iplglb=1,
C                iplpol=1, ipllon=1, or iplutlat=1
C SLON = selected longitudes (-180 to 180) (max of 5 lons)
C SSLT = selected solar local times (max of 5 times)
C SLAT = selected latitudes (-87.5 to +87.5) (max 5 lats)
C SPLS = selected pressure levels (-7 to +5) (max of 5 pressures)
C SHTS = selected heights (will interpolate for global and polar plots)
C HTUB = upper boundary for linear height scale (must be multiple of 100.)
C        (if htub > htmax at grid point: zonal mean will extrapolate to
C         htub, but all others will leave plot blank above htmax)
C LATLON = lat,lon locations for center of satellite view projections
C          (lon = 999. means use local noon longitude)
C PLTIGCM -> choose fields to be contoured
C
C<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
C
 NCASE = 1
 ENDOFREAD
C
Ccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccc
C
C /ROBLE/RGR92:
C
C DYEM75 (8:0:0) equinox tiegcm
C TIEQ05 (8:0:0) equinox tigcm
C
C DYSM29 (20:0:0) solstice tiegcm
C TIWT25 (15:0:0) solstice tigcm
C
Ccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccc
C
CLABEL = 'EQUINOX TIEGCM                  '
CLABEL = 'EQUINOX TIGCM                   '
CLABEL = 'SOLSTICE TIEGCM                 '
 LABEL = 'SOLSTICE TIGCM                  '
 DYN = 0
CHISTVOL = 'ROBLE','RGR92','DYEM75'
CHISTVOL = 'ROBLE','RGR92','TIEQ05'
CHISTVOL = 'ROBLE','RGR92','DYSM29'
 HISTVOL = 'ROBLE','RGR92','TIWT27'
CDDHHMM = '08:00:00'
CDDHHMM = '08:00:00'
CDDHHMM = '20:00:00'
 DDHHMM = '15:00:00'
C
CIYD = 76080
 IYD = 76355
 IDEN = 0
 LOG10PL = 0
 COLOR = 0
C
C Plots at single ut:
 PLGLB = 1
CPOLPERIM = -27.5,27.5
 PLSATV = 0
 PLLATZP = 0
 PLLATHT = 0
 PLLONZP = 1
C
C Plots with ut on x-axis:
C (End with M refers to global means)
 PLUTLAT = 0
 PLUTZPM = 0
 PLUTHTM = 0
C
C Cooling/heating terms:
 PLCOOL = 0
C
C Selected grid:
C (can use SLON=-999. to get zonal means for lon slices)
C (can use LATLON = -70.,999. to get local noon lon for sat view)
C
 SLON = -999.
CSSLT = 0.,12.
 SLAT = 2.5
 SPLS = 2.
CSHTS = 110.,300.
 HTUB = 400.
CLATLON = -70.0,999.,70.,999.
 LATLON = 42.5,180.
C
C         T   U   V  O2   O N4S  NO  O+ N2D  TI  TE  NE O2+   W   Z  N2
 PLTIGCM =1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  0,  0,  0,
C       FOF2 HMF2 RHO RAT 
          0,  0,  0,  0
C
C           POTEN UI VI WI SUMPOT HPOTEN HUI HVI HWI
 PLTIEGCM =   0,  0, 0, 0,   0,     0,    0,  0,  0
C
C23456789012345678901234567890123456789012345678901234567890123456789012 
C        T   U   V  O2   O N4S  NO  O+ N2D  TI  TE  NE O2+   W   Z  N2
C      FOF2 HMF2 RHO RAT 
 CONMINS=1., 1., 1.,1.,1.,1.,1.,1.,1.,1., 1.,1.,1., 1.,1.,1.,
          1.,-20., 1., 1.
 CONMAXS=0., 0., 0.,0., 0.,0.,0.,0.,0.,0.,0.,0.,0.,0.,0.,0.,
          0.,10., 0., 0.
 CONINTS= 30.,50.,0.,  0., 0.,0.,0.,0.,0.,  0.,0., .2, 0., 0., 0.,0.,
          0.,0., 0., 0.
 CINTDYN= 2000.,0.,0.,0.,0.,0.,0.,0.,0.
 ENDOFREAD