C Ccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccc C C INPUT FILE FOR TIGCMLOC CRAY PROCESSOR (zp = -7 to +5, kmx=25): C (binary executable is on mss /FOSTER/bin/tigcmloc) C (source is on sting:~foster/tigcmloc and mss /FOSTER/src/tigcmloc.tar) C C This is a multi-ut processor, i.e., most plots are made with ut on x-axis C C This processor will accept tigcm or tiegcm histories, however: C If electric potential or ion drift plots are requested (pot,ui,vi,wi), C and the history is tigcm (not tiegcm), a notice will be printed C to stdout (unit 6), and potential and/or ion drifts will not be plotted. C C All values below DDHHMM except FIELDS may be commented out to get the C default value, or to suppress the plotting option. Always comment out C in column one with an upper case C. C All uncommented keyword = value lexical read lines must start in C column two and be <= 72 columns per line. (you can use the ruler at C CMIN,CMAX,CINT for reference). New lines may be used if a comma C appears at the end of the previous line. C Do not use tabs as white space in lexical reads. C C HISTVOL = tigcm or tiegcm history volume(s) (24-char mss path per volume) C e.g., '/ROBLE/RGR92/LTCS01 ','/ROBLE/RGR92/LTCS02 ' C DDHHMM = model day,hour,min of each desired history C (3 comma-separated integers per history, e.g., 3,0,0, 3,1,0) C (can use 99 as one of the integers to determine histories on volume; C 99 will not be found, and times found will be printed to stdout) C (HISTVOL and DDHHMM are required inputs) C IDEN = 0 -> leave species as on history (most are mass mixing ratios) C IDEN = 1 -> convert species to number densities (cm3) C IDEN = 2 -> convert species to mass density (gm/cm3) C (except ne, o+, and o2+ which remain number density) C (default IDEN = 1) C Note o+, ne, and o2+ are number densities on the history, and will C be left as such (cm-3) even when IDEN = 0 C COLOR = 1 -> make color fill contours, monochrome otherwise C (default COLOR = 0) C PLUTVERT = 1 -> contour with ut on x-axis, zp/ht on y-axis at LOC C locations. ZP_RANGE and/or HT_SCALE are used to determine y-axis C (set PLUTVERT=0 for no such contours) C LOC = lat,lon pairs of selected locations. May use lat,999. to get C zonal means at selected lat, or 999.,999. to get global means C BILIN = 1 -> do bilinear interpolation to desired location; if BILIN=0, C use nearest grid point. (No interp is done for global means. C If doing zonal means and BILIN=1, interp is done to desired lat) C LOGLOC = 1 -> plot log10 of density fields at locations, otherwise no C ZP_RANGE = bottom,top range of pressures for y-axis (-7 -> +5) C (e.g.: ZP_RANGE= -4.,2.) C (used for PLUTVERT contours and UTLINE line plots) C HT_SCALE = bottom,top,delta heights for y-axis, e.g., 100.,500.,10. C (used for PLUTVERT contours and UTLINE line plots) C ZPHTLINE = selected zp(s) and/or ht(s) at which to make line plots at C LOC locations with ut on x-axis, field on y-axis C (is assumed a height if > 5., otherwise is assumed zp) C UTLINE = selected times (integer triplets) at which to make line plots C at LOC locations with field on x-axis, zp/ht on y-axis C (must be subset of DDHHMM) (ZP_RANGE and/or HT_SCALE will be C used for y-axis) C ZPHT_LON = pairs of zp/ht,lon for contours with ut on x-axis, lat on y-axis C (first of each pair may be pressure or height, 2nd of each pair may be C a longitude, or 999. for zonal means) C C --------------- FIELDS AND CONTOUR VALUES ---------------- C C FIELDS = fields to plot (integers 0 or 1) C (this is required, and must provide a value for each field) C (rho is total density o2 + o1 + n2) C (fof2 and hmf2 will not be plotted where zp/ht is on y-axis) C WRASCII = 0 -> do not make ascii data file(s) C WRASCII = 1 -> make an ascii data file for each frame C (file names will be tigcmproc.fr001.dat, tigcmproc.fr002.dat, ...) C WRASCII = 2 -> make single ascii file containing data from each frame C (file name will be tigcmproc.dat) C DIRASCII = 56-char remote directory to which ascii data file(s) may be C remote copied, e.g.: C e.g., DIRASCII = 'sting.hao.ucar.edu:/d/foster/tigcmloc ' C DIRCGM = 56-char remote directory to which metacode file (gmeta) may be C remote copied. C C CMIN = contour minimums (if > CMAX, will use min of plotted array) C CMAX = contour maximums (if < CMIN, will use max of plotted array) C CINT = contour intervals (if = 0., will choose interval in software) C (CMIN,CMAX,CINT are floating point values) C (defaults for CMIN,CMAX,CINT = 1.,0.,0. for all fields) C C Note CMIN must be < CMAX, and CINT > 0. for CMIN,CMAX to take effect C however, CINT > 0. will take effect regardless of CMIN,CMAX C CMIN,CMAX,CINT apply to all plots. Remember that these will change C radically on mapped projections depending on LOG10. Note also that a C CINT that is appropriate for mapped projections may not be appropriate C for vertical slices. C C Please direct comments, bugs, and suggestions for additional options to: C Ben Foster (hao) (foster@ncar.ucar.edu) 303-497-1595 C Ccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccc C C See jul82.vols for details regarding July 9-17, 1982 run C CHISTVOL = '/FOSTER/BTF93/TIJST1 ','/FOSTER/BTF93/TIJST2 ', C '/FOSTER/BTF93/TIJST3 ','/FOSTER/BTF93/TIJST4 ', C '/FOSTER/BTF93/TIJST5 ','/FOSTER/BTF93/TIJST6 ', C '/FOSTER/BTF93/TIJST7 ','/FOSTER/BTF93/TIJST8 ' HISTVOL = '/FOSTER/BTF93/TIJST8 ','/FOSTER/BTF93/TIJST9 ', '/FOSTER/BTF93/TIJST10 ','/FOSTER/BTF93/TIJST11 ', '/FOSTER/BTF93/TIJST12 ','/FOSTER/BTF93/TIJST13 ', '/FOSTER/BTF93/TIJST14 ','/FOSTER/BTF93/TIJST15 ' CDDHHMM = 9, 0,0, 9, 1,0, 9, 2,0, 9, 3,0, 9, 4,0, 9, 5,0, 9, 6,0, C 9, 7,0, 9, 8,0, 9, 9,0, 9,10,0, 9,11,0, 9,12,0, 9,13,0, C 9,14,0, 9,15,0, 9,16,0, 9,17,0, 9,18,0, 9,19,0, 9,20,0, C 9,21,0, 9,22,0, 9,23,0, 10, 0,0, 10, 1,0, 10, 2,0, 10, 3,0, C 10, 4,0, 10, 5,0, 10, 6,0, 10, 7,0, 10, 8,0, 10, 9,0, 10,10,0, C 10,11,0, 10,12,0, 10,13,0, 10,14,0, 10,15,0, 10,16,0, 10,17,0, C 10,18,0, 10,19,0, 10,20,0, 10,21,0, 10,22,0, 10,23,0, 11, 0,0, C 11, 1,0, 11, 2,0, 11, 3,0, 11, 4,0, 11, 5,0, 11, 6,0, 11, 7,0, C 11, 8,0, 11, 9,0, 11,10,0, 11,11,0, 11,12,0, 11,13,0, 11,14,0, C 11,15,0, 11,16,0, 11,17,0, 11,18,0, 11,19,0, 11,20,0, 11,21,0, C 11,22,0, 11,23,0, 12, 0,0, 12, 1,0, 12, 2,0, 12, 3,0, 12, 4,0, C 12, 5,0, 12, 6,0, 12, 7,0, 12, 8,0, 12, 9,0, 12,10,0, 12,11,0, C 12,12,0, 12,13,0, 12,14,0, 12,15,0, 12,16,0, 12,17,0, 12,18,0, C 12,19,0, 12,20,0, 12,21,0, 12,22,0, 12,23,0, 13, 0,0 DDHHMM = 13, 0,0, 13, 1,0, 13, 2,0, 13, 3,0, 13, 4,0, 13, 5,0, 13, 6,0, 13, 7,0, 13, 8,0, 13, 9,0, 13,10,0, 13,11,0, 13,12,0, 13,13,0, 13,14,0, 13,15,0, 13,16,0, 13,17,0, 13,18,0, 13,19,0, 13,20,0, 13,21,0, 13,22,0, 13,23,0, 14, 0,0, 14, 1,0, 14, 2,0, 14, 3,0, 14, 4,0, 14, 5,0, 14, 6,0, 14, 7,0, 14, 8,0, 14, 9,0, 14,10,0, 14,11,0, 14,12,0, 14,13,0, 14,14,0, 14,15,0, 14,16,0, 14,17,0, 14,18,0, 14,19,0, 14,20,0, 14,21,0, 14,22,0, 14,23,0, 15, 0,0, 15, 1,0, 15, 2,0, 15, 3,0, 15, 4,0, 15, 5,0, 15, 6,0, 15, 7,0, 15, 8,0, 15, 9,0, 15,10,0, 15,11,0, 15,12,0, 15,13,0, 15,14,0, 15,15,0, 15,16,0, 15,17,0, 15,18,0, 15,19,0, 15,20,0, 15,21,0, 15,22,0, 15,23,0, 16, 0,0, 16, 1,0, 16, 2,0, 16, 3,0, 16, 4,0, 16, 5,0, 16, 6,0, 16, 7,0, 16, 8,0, 16, 9,0, 16,10,0, 16,11,0, 16,12,0, 16,13,0, 16,14,0, 16,15,0, 16,16,0, 16,17,0, 16,18,0, 16,19,0, 16,20,0, 16,21,0, 16,22,0, 16,23,0, 17, 0,0 C C IDEN=0 -> mass mixing ratios; IDEN=1 -> cm3; IDEN=2 -> gm/cm3 C IDEN = 1 COLOR = 0 C PLUTVERT = 1 C Arecibo, Sondrestrom, Millstone, global mean LOC = 18.3,-66.8, 67.,-51., 42.6,-71.5, 999.,999. BILIN = 1 LOGLOC = 1 CZP_RANGE = -7.,5. HT_SCALE = 90.,500.,10. CZPHTLINE = 2. CUTLINE = 2,18,0 C C ZPHT_LON = pairs of zp/ht,lon for contours with ut on x-axis, lat on y-axis C (first of each pair may be pressure or height, 2nd of each pair may be C a longitude or 999. for zonal means) C ZPHT_LON = 110.,-70., 250.,-70., 350.,-70., 110.,999. LOGUTLAT = 1 C C tn un vn o2 o1 n4s no o+ n2d ti te ne o2+ w z FIELDS = 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, C pot n2 ui vi wi fof2 hmf2 rho o/(o2+n2) o/n2 0, 1, 0, 0, 0, 0, 0, 0, 0, 0 WRASCII = 0 DIRASCII = 'sting.hao.ucar.edu:/d/foster/tigcmloc ' CDIRCGM = 'sting.hao.ucar.edu:/d/foster/tigcmloc ' C C23456789012345678901234567890123456789012345678901234567890123456789012 C tn un vn o2 o1 n4s no o+ CCMIN = 1., 1., 1., 1., 1., 1., 1., 1., C n2d ti te ne o2+ w z pot C 1., 1., 1., 1., 1., 1., 1., 1., C n2 ui vi wi fof2 hmf2 rho o/(o2+n2) C 1., 1., 1., 1., 1., 1., 1., 1., C o/n2 C 1. C C23456789012345678901234567890123456789012345678901234567890123456789012 C tn un vn o2 o1 n4s no o+ CCMAX = 0., 0., 0., 0., 0., 0., 0., 0., C n2d ti te ne o2+ w z pot C 0., 0., 0., 0., 0., 0., 0., 0., C n2 ui vi wi fof2 hmf2 rho o/(o2+n2) C 0., 0., 0., 0., 0., 0., 0., 0., C o/n2 C 0. C C23456789012345678901234567890123456789012345678901234567890123456789012 C tn un vn o2 o1 n4s no o+ CCINT = 0., 0., 0., 0., 0., 0., 0., 0., C n2d ti te ne o2+ w z pot C 0., 0., 0., .2, 0., 0., 0., 0., C n2 ui vi wi fof2 hmf2 rho o/(o2+n2) C 0., 0., 0., 0., 0., 0., 0., 0., C o/n2 C 0. ENDOFREAD